Rorke Data The Galaxy 65 Especificaciones descargar pdf (Pagina 51)

Chapter 2 Hardware Installation

Hardware Installation

2-19

2.9. Drive Tray Installation

Before drive tray installation, you need to access the drive bays on the left- and right-side

columns:

To access drive bays hidden behind the forearm handles, first release the retention latches

on the enclosure front handles, and then swing the handles to the left and right-hand

sides. To close the handles, see Figure 2-16, first swing the handles towards the center to

reveal the retention latch, release the latch, and then close the handles.

Figure 2-16: Closing the front handles

Install the drive trays into the subsystem once the hard drives have been installed in the

drive trays.

Step 1. Use a flat blade screwdriver to turn the rotary bezel lock to the

unlocked position, i.e., the groove on its face is in a horizontal

orientation. If the groove is in a vertical position, then the bezel lock is

locked and the front bezel cannot be opened.

Figure 2-17: Drive Tray Front Bezel

Step 2. Open the front bezel by pushing the release button. The front bezel

will automatically swing open.

Clip

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 128 129

Sin comentarios

Rorke Data The Galaxy 65 Especificaciones Pagina 51